Courtesy of me!

So you want to disable your speed limiter(AKA Governor)? Pictures coming up soon. Here ya go guys!!

• Remove your dual cupholders and locate the wiring harness beneath.

• Cut the black plastic piece surrounding the wires.

• Carefully find the white wire with the BLACK stripe. There is a white wire with a green stripe... make sure thats not it.

• Cut the white wire with the BLACK stripe.

I added a toggle switch to my governor. For about 3 dollars, you can go to radio shack and buy a small switch. Connect one side of the governor wire to the center terminal, and one to whichever side you want. Drill a small hole in your center console, and mount the switch. I also had to buy a small reel of hook-up wire to lengthen the governor wire.

Your car should have a check engine light pop up after a couple days. This is normal, don't worry. The switch I use makes it so that my light doesn't come on for the governor.

DISCLAIMER

www.ZX2.com or its creators WILL NOT be held responsible for any damage or financial compensations caused in whole or in part by the information held on this page. If you choose to disable your governor, please be responsible with it. --Webmaster